Battery Pack Thermal Test Room
Product Description
Battery Pack Thermal Test Room is ideally suited for specimen test requiring quick changes of temperature. It can evaluate the failure of thermal mechanical properites of product. Normally the temperature rate is less than 20C/min, which can achieve the real application environment of testing sample by the fast ramp rate.
Product Info
Unit | USD |
---|---|
Minorder | 1 |
Supplyability | 30 Set/Sets per Month |
Port | shenzhen |
Certification | ISO,CE |
Place | DongGuang,China |
Packaging | Each set protected by resin fiber and PP film, then put into Strong wooden case with operation manual and vedio inside. |
Product Detail
Battery Pack Thermal Test Room
INTRODUCTION
This chamber is ideally suited for specimen test requiring quick changes of temperature. It can evaluate the failure of thermal mechanical properites of product. Normally the temperature rate is less than 20C/min, which can achieve the real application environment of testing sample by the fast ramp rate.
STANDARD FEATURES FOR CHAMBER
Item | HD-E708-1600 | |
Internal dimension(W*D*H) | 1300*1200*1000mm | |
External dimension(W*D*H) | 2000*2000*1400mm | |
Temperature range | -40℃~+150℃ | |
Temperature fluctuation | ±1℃ | |
Cooling speed(+85C~-40C) | 10℃/min; non-linear | |
Heating speed(-40C~+85C) | 10℃/min; non-linear | |
Humidity range | 10~98%RH | |
Humidity fluctuation | ±3%RH | |
Control system | Color LCD programmable touch screen system | |
Internal chamber material | SUS#304 stainless steel, mirror finished | |
External chamber material | Stainless steel with paint spray | |
Refrigeration Unit | System | Water-cooled |
Compressor | German Bock | |
Expansion system | Electronic expansion valve | |
Refrigerant | R404A/R23 | |
Sample tray | SUS#304 stainless steel, 2pcs | |
Testing hole | 6 holes with diameter 100mm on lateral side, for cable routing | |
Venting system | Equip on the top of the machine | |
Remote Interface(s) | Ethernet, RS232, USB | |
Power supply source | Three-phase, 380V, 50Hz | |
Power | 60KW | |
Current | 120A | |
Safety protection device | Protection for leakage Over-temperature Compressor over-voltage and overload Heater short circuit |
CHAMBER DESIGN FEATURES
1. Has cable ports are provided on the left side to allow easy wiring of specimens for measurement or voltage application;
2. The door equipped with hinges preventing auto-closing;
3. Can designed to comply with major environmental test standards like IEC, JEDEC, SAE...
4. High performance and quiet operation (80 dBA)
TEMPERATURE HUMIDITY CHART