Battery Pack Short Circuit Tester
Product Description
Battery Pack Short Circuit Tester manufacturer supply crush nail penetration tester, traction battery drop Tester, Walk in dust-proof test chamber and other equipments.
Product Info
| Unit | USD |
|---|---|
| Minorder | 1 |
| Supplyability | 30 Set/Sets per Month |
| Port | shenzhen |
| Certification | ISO，CE |
| Place | Guangdong, China |
| Packaging | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
Product Detail
Battery Pack Short Circuit Tester
TEST PURPOSE
This machine is designed according with the requirements of various battery short-circuit test standards. According to the standard, the short-circuit device must meet the internal resistance of 80 ± 20mΩ to obtain the maximum short-circuit current required by test. In addition, the circuit design of the short-circuit device must also be able to withstand large currents impact.
We chose industrial-grade DC electromagnetic contactors, all-copper terminals, and internal copper plates to guide the flow. The wide and thick copper plates effectively improve the heat dissipation effect, make the high current short-circuit device safer, effectively reduce the loss of test equipment, and ensure the test data Accuracy.
TEST STANDARD
IEC62133; UL 1642:2012; UN38.3
STANDARD FEATURES
| Item | Specification |
| Internal Dimension | 500*500*500mm(W*D*H) |
| External Dimension | 700*800*1530mm(W*D*H) |
| Internal Material | SUS201 stainless steel plate, 1.2mm thick and affixed with Teflon; |
| External Material | Paint treatment of cold-rolled steel sheet |
| Observe Window | 250*250mm |
| Two layers of tempered glass | |
| Transparent window with stainless steel mesh | |
| Exhaust port | Diameter 100mm |
| Pressure relief port | 200*200mm |
| Door | Single door design, the door is equipped with a safety limit switch The side is equipped with an explosion-proof chain Only close the door to operate the device to ensure the safety of personnel |
| Testing Hole | There are two testing hole diameter 50mm, for cable connect. |
| Control Mode | Key Type |
| Temperature collection range | RT-1000℃ |
| Temperature Acquisition Channel | Channel 1 |
| Temperature Display Accuracy | ±0.5℃ |
| Voltage collection range | 0-100V |
| Voltage Acquisition Channel | Channel 1 |
| Voltage Display Accuracy | ±0.5% |
| Maximum Short-circuit Current | 1000A |
| Current Acquisition Channel | Channel 1 |
| Current Display Accuracy | ±0.5% |
| Internal Resistance of Device Loop |
80±20mΩ |
| Voltage | Single Phase 220V |
| Power | 200W |
| Machine Weight | 85kg |