Battery Walk In Salt Spray Chamber
Product Description
Battery Walk In Salt Spray Chamber exposure zone lined with corrosion-resistant PVC sheets, peaked cover prevents dripping of condensation onto samples.
Product Info
| Unit | USD |
|---|---|
| Minorder | 1 |
| Supplyability | 30 Set/Sets per Month |
| Port | shenzhen |
| Certification | ISO，CE |
| Place | DongGuang,China |
| Packaging | Each set protected by resin fiber and PP film, then put into Strong wooden case with operation manual and vedio inside. |
Product Detail
Battery Walk In Salt Spray Chamber
STANDARD PARAMETERS
| Model | HD-E809-3 |
| Internal Size(WxDxH) | 2500x1000x1500mm |
| External Size (L×W×H) | 3100x2200x1800mm |
| Controller | PLC controller, touch screen, programmable, high definition |
| Temperature Range | Room temperature ~ 60℃ |
| Temperature Fluctuations | ≤±0.5℃ |
| Temperature Uniformity | ≤±2℃ |
| Temperature Precision | ±1℃ |
| Humidity Range | 30~98% R.H. |
| Humidity Precision | ±3% R.H. |
| Test Mode | Salt Spray Mode, Wetting Mode, Drying Mode Tempt. And Humidity Mode. |
| Heater System | Ti-alloy high speed electrical heating system. |
| Humidity & De-humidity System | Two independent system. Float level controller to prevent electrical misoperation |
| Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1℃ Corrosion-resistant Testing Method (CASS) 50±1℃ |
| Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1℃ Corrosion-resistant Testing Method (CASS) 63±1℃ |
| Brine Temperature | 35℃±1℃ |
| Spray Quantity | 0.5~2.5 ml / 80cm2 / hr |
| PH value | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Lab Volume | 3.75m3 |
| Brine Tank Capacity | 110L |
| Multiple Safety Protection Devices | Current discharge protection, over-load protection, over temperature protection, shortage protection. With indicate lights |
| Water Supply | Auto-filling and drainage |
| Air Supply | 8 bar air compressor |
| Power source | Single-phase, 230±10%V, 50Hz |
PRODUCT FEATURES
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.