Corrosion Testing Chamber
Product Description
Corrosion Testing Chamber is applicable for various kinds material's surface treatment, such as after coating, electroplate, inorganic and organic membrane dermails, negative pole with antirust oil treatment etc anti-corrosive treatment to test the corrosion-resistance of the product .
Product Info
| Unit | USD |
|---|---|
| Minorder | 1 |
| Supplyability | 30 Set/Sets per Month |
| Port | shenzhen |
| Certification | ISO，CE |
| Place | Guangdong, China |
| Packaging | Each set protected by resin fiber and PP film, then put into Strong wooden case with operation manual and vedio inside. |
Product Detail
Corrosion Testing Chamber
Applications
Corrosion Testing Chamber is used to test the anti-erosion quality of the surface of all materials after the rust-proof of painting, coating, electroplating, anoding and rust-proof of greasing.anti corrosion treatment for a variety of materials, corrosion resistance of their products.
Standard Parameters
| Model | HD-E808 |
| Internal Size (W*D*H) | 1900*1300*1400mm(L*W*H) |
| Chamber material | PLC controller, touch-tone controller, can be customized |
| Sample tray | Diameter 10mm glass fiber rod, anti-rust V-shape plastic steel to make sure sample in 15~30 degree inclined |
| Temperature Range | Room temperature ~ 55℃ |
| Temperature Fluctuations | ≤±0.5℃ |
| Temperature Uniformity | ≤±2℃ |
| Temperature Precision | ±1℃ |
| Spraying method | Continuous and Periodic spray type |
| Test Chamber Temperature | Salt Spray Method (NSS ACSS)35±1℃ Corrosion-resistant Testing Method (CASS) 50±1℃ |
| Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1℃ Corrosion-resistant Testing Method (CASS) 63±1℃ |
| Brine Temperature | 35℃±1℃ |
| Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
| PH value | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method(CASS)3.0~3.2 |
| Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection, over load fuse protection |
| Accessories | Testing Salt/ Measuring tank/Nozzle Equipment x 1 set |
| Air source | 1HP Air pump (provided by buyer) |
| Test criteria | ASTM B117-08, ISO 9227 |
Test Standards
1.ASTM.B117-97 salt spray test
2.JIS H8502 salt spray test
3.IEC68-2-11 salt spray test
4.IEC68-2-52 1996 salt spray test
5.GB.10587-89 salt spray test
6.CNS.4158 salt spray test
7.CNS.4159 CASS Accelerated acetic acid copper salt spray test
8.GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray test
Product Features
1, Durable 8 mm PVC construction, anti-corrosion and easy to clean.
2, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
3, Exposure zone lined with corrosion-resistant PVC sheets.
4, Clear cover allows viewing of test conditions.
5, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
6, Automatic DI water fills to humidifying tower.
7, Digital temperature control.
8, Integral over-protection on heaters.
9, Low water cut-off protection on humidifying tower.