High Performance Xenon Lamp Weathering Test Chamber(Air-Cooled)
Product Description
Xenon lamp weathering test chamber(air-cooled) is used in the xenon lamp test chamber to simulate the whole solar spectrum and the destructive light waves existing in different environments.This equipment can provide corresponding environmental simulation and accelerated test, specialized for scientific research, product development and product quality control and so on.
Product Info
Unit | USD |
---|---|
Minorder | 1 |
Supplyability | 30 sets/Month |
Port | shenzhen |
Certification | ISO,CE |
Place | Guangdong, China |
Packaging | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
Product Detail
PRODUCT INTRODUCTION
Xenon lamp weathering test chamber(air-cooled) is used in the xenon lamp test chamber to simulate the whole solar spectrum and the destructive light waves existing in different environments.
This equipment can provide corresponding environmental simulation and accelerated test, specialized for scientific research, product development and product quality control and so on.To evaluate the light and weather resistance of some materials under the action of high temperature light source. Mainly used in automobile, coating, rubber, plastic, pigment, adhesive, fabric, etc.
This equipment designed to meet the requirements of ISO 105 B02 and AATCC Test Method 16 standards. It has a rotating specimen rack and provides precise control of critical test parameters including spectrum, irradiance, relative humidity, chamber temperature and black standard temperature.
Usage
To determine the resistance of the color of textiles to fade when exposed to artificial light (xenon arc) which is representative of natural daylight.
Salient features
Technical parameters
Lamp & Lantern Specifications
SPECTRAL POWER DISTRIBRATION FROM 300TO 600NM
Xenon lamp weathering test chamber(air-cooled) is used in the xenon lamp test chamber to simulate the whole solar spectrum and the destructive light waves existing in different environments.
This equipment can provide corresponding environmental simulation and accelerated test, specialized for scientific research, product development and product quality control and so on.To evaluate the light and weather resistance of some materials under the action of high temperature light source. Mainly used in automobile, coating, rubber, plastic, pigment, adhesive, fabric, etc.
This equipment designed to meet the requirements of ISO 105 B02 and AATCC Test Method 16 standards. It has a rotating specimen rack and provides precise control of critical test parameters including spectrum, irradiance, relative humidity, chamber temperature and black standard temperature.
Usage
To determine the resistance of the color of textiles to fade when exposed to artificial light (xenon arc) which is representative of natural daylight.
Salient features
- Full Color 10.4" Touch Screen Control Panel Display of
- Direct Setting and Control of Irradiance
- Direct Setting and Control of BPT/BST
- Direct Setting and Control of Relative Humidity
- Direct Setting and Control of Specimen and Chamber Air Temperature
- 8 Factory Pre-programmed Test Methods
- Space for 4 Custom Programs
- Graphic display of the progression of all test parameters.
- High performance, long lasting, air-cooled xenon lamp.
- Solar-powered radiometer, incorporating a black standard thermometer.
- Works in “controlled irradiance” or “blue wool” mode.
- Eleven double-sided sample holders offer a massive exposure area of up to 1370cm².
- Refined software which perfectly reflects the needs of the operator.
- High efficiency power supply ensures running costs remain low.
- Complies with international standards for textiles, leather and other materials.
- Compact, stylish and ergonomic design.
Technical parameters
Light Source | 2500W air-cooled xenon arc lamp (recommend replacing lamps every 1500 hours) |
Test types | Light only, Dark only, Spray only |
Total Exposure Area | 1370cm² |
Test Positions | 11 (ISO) or 5 (AATCC) |
Exposure Area of each Test Position | ISO 65.25cm² (145 x 45) mm AATCC 108.75cm² (145 x 75) mm |
Irradiance Monitoring System | Radiometer |
Irradiance 420nm Range | 0.80~2.01W/m² |
Rack rotating speed | 5r/min |
Test Chamber Humidity Range | Light Cycle 10%~70%RH,Dark Cycle 30%~95%RH |
Test Chamber Temperature Range | 25ºC~50ºC |
Black Standard Temperature Range | 40ºC~85ºC±1ºC |
Black Panel Temperature Range(optional) | 40ºC~80ºC±2ºC |
Water spray | specimen surface |
Water Reservoir Capacity | 15 liters |
Water Consumption (ISO 105-BO2 Normal) | 0.9 l/h (max.) |
Color Touch Screen | Supplied as standard |
Chamber Viewing Window | Supplied as standard |
Lamp & Lantern Specifications
Item | Qty | Description |
Lamp | 1 | 2500W Xenon, Air-Cooled |
Inner Filters | 7 | Windows |
Outer Filter Cylinder | 1 | Quartz |
SPECTRAL POWER DISTRIBRATION FROM 300TO 600NM