Programmable Hot And Cold Shock Test Chamber(HD-E703-200)
Product Description
Hot and cold shock test chamber is used to test the material structure or composite material, under the instantaneous extremely high temperature and extremely low temperature continuous environment can withstand the degree, in order to test its thermal expansion and cold shrinkage caused by chemical changes or physical damage in the shortest time.The applicable objects include metal, plastic, rubber, electronic and other materials, which can be used as the basis or reference for product improvement.
Product Info
Unit | set |
---|---|
Minorder | 1 |
Supplyability | 150 Set/Sets per Month |
Port | Shenzhen |
Certification | ISO,CE |
Place | Guangdong, China |
Packaging | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
Product Detail
Product Introduction:
The product is suitable for the safety performance test of electronic components to provide reliability test, product screening test, etc. At the same time through this equipment test, can improve the reliability of the product and product quality control.
High and low temperature impact test chamber is aviation, automobile, home appliances, research in areas such as the necessary test equipment, test and determine the electrician, electronics, automotive electronics, materials and other products, in the high and low temperature test the temperature of the environment impact parameter and the performance after the change, use flexibility, suitable for schools, factories, military industry, research, etc.
Test Standard:
1、GJB150.5A-2009
2、GB/2423.22-2012/IEC 60068-2-14:2009
3、GB/T 2424.13-2002/IEC 60068-2-33:1971
4、GJB360B-2009
5、GB/T 2423.1-2008/IEC6008-2-1-2007
6、GB/T 2423.2-2008/IEC60068-2-2:2007
7、GB/T 10589-2008
8、GB/T 11158-2008
Main Technical Parameters:
Model | HD-E703-200K40 | HD-E703-200K55 | HD-E703-200K65 |
Nominal content product(L) | 200 | ||
Inside the box size(mm) | 650×450×670(W×H×D) | ||
Overall dimensions(mm) | 1530×1800×1980(W×H×D) | ||
Technical parameters | Temperature range |
High temperature | RT~170 ℃ |
Low temperature | -75℃ ~RT | ||
Test area | -40℃ ~150℃ | -50℃ ~150℃ | -65℃ ~150℃ |
Temperature shock range | High temperature | 60℃ ~150℃ | |
Low temperature | -10℃ ~-40℃ | -10℃ ~-50℃ | -10℃ ~-65℃ |
Normal temperature zone | Indoor temperature | ||
Temperature and humidity deviation | ±0.3℃,±2%R·H | ||
Difference in temperature and humidity | ±2℃,±3%R·H | ||
Heating rate | 2℃/min | ||
Cooling rate | 0.5~1.2℃/min | ||
Cold storage time | RT→-75℃≤ 65min | ||
Thermal storage time | RT→170℃≤ 35min | ||
Refrigeration system | Compressor | Imported German blog, R23 / R404A refrigerant | |
Cooling way | Water or air cooling | ||
Condenser | Stainless steel brazed plate type heat exchanger | ||
Heater/evaporator | Nickel-chromium electric heater/finned evaporator | ||
Microcomputer & display screen | TT-5188T3-7HLTaitong controller | ||
Drive motors | Drive | ||
Temperature and humidity sensor | Japan | ||
Safety measures | No fuse switch, compressor overpressure, overheat, overcurrent protection, fuse, water flow protection, phase sequence protection, oil pressure protection, pressure relief protection, low pressure protection, pressure cylinder protection, temperature limit protection | ||
Material | Chassis shell | High quality cold rolled steel sheet is sprayed with static electricity | |
Inner wall of the chassis | SUS304# Stainless steel plate | ||
Heat preservation material | Polyurethane rigid foam + high density fiberglass cotton | ||
Standard configuration | Test hole, floodlight, double vacuum bulletproof glass observation window | ||
Weight | |||
Max. power | |||
Power supply | three-phase,380V,50Hz |