Xenon Accelerated Aging Test Chamber
Product Description
Xenon Aging Testing Chamber is used for the selection of new materials, the improvement of existing materials or evaluating the changes in product formulation that affect product durability. This is an ideal instrument for total Accelerated Light Stability and Weathering Testing; And can be used to test for light stability quickly.
Product Info
| Unit | USD |
|---|---|
| Minorder | 1 |
| Supplyability | 30 Set/Sets per Month |
| Port | shenzhen |
| Certification | ISO，CE |
| Place | Guangdong, China |
| Packaging | Each set protected by resin fiber and PP film, then put into Strong wooden case with operation manual and vedio inside. |
Product Detail
Xenon Accelerated Aging Test Chamber
Product Description
The xenon aging testing chamber uses xenon arc lamps which can simulate the whole sunlight spectrum to reproduce the destructive light waves in different environments:
- Environmental simulation and accelerated test can be provided for scientific research, product development and quality control.
- Xenon arc testing machine can be used for the selection of new materials, improvement of existing materials or evaluation materials to make changes in durability.
Main Parameter
| Item | Specification |
| Internal Dimension (W*D*H) | 800*800*800mm |
| External Dimension (W*D*H) | 1450*1500*2000mm |
| Inner chamber material | SUS 304 # Stainless Steel, Anti-rust, easy to clean |
| Outer chamber material | Stainless steel |
| Chamber Temperature | 40±3℃ |
| Temperature Uniformity | ≤3℃ |
| Blank panel temperature | 65±3℃ |
| Humidity Range | 50%-90% |
| Irradiated intensity | 0.35±0.02w/m²at 340nm |
| Xenon lamp power | 6.5KW water-cooled xenon lamp x 1pc |
| Control system | PLC controller, touch screen |
| Distance from specimen to arc center | 250~300mm, Effective exposure area 6400cm2 |
| Max. Sample dimension | 200*90mm Thickness＜20mm |
| Filter | Daylight filter |
| Door seal | Silicone rubber seal |
| Temperature sensor | PT100 high precision temperature sensor |
| Air circulation system | Stainless steel centrifugal rotor vane to improve the uniformity of temperature and humidity |
| Cooling ventilator | Automatic controlled by temperature controller, and inner chamber cooled by refrigerating system |
| Cooling ventilator | France Tecumseh compressor |
| Power | AC380V, 50Hz, three phase |
| Safety Protection | Over heat protection for fan, Over load protection for cooling system, Over pressure protection for cooling system, Over temperature protection, Over heat and over flow protection for water pump, Leakage protection, Water shortage protection, Auto stop after failure warning |
Test methods and parameters as per standard ASTM D 4355:
| Duration | 150h, 300h, 500h |
| Light Source | Xenon Arc |
| Filter | Daylight filters |
| Irradiated Intensity | 0.35±0.02w/m²at 340nm |
| Temperature of black panel | 65±3℃ |
| Relative humidity | 50%-90% |
| Cycles | |
| 90min of light only at 65±3℃ and 50%±5% relative humidity | |
| 30min of light plus water spray |
Detail Images